You are browsing documentation for an outdated version. See the latest documentation here.
One of the ways Kong delivers performance is through caching. The Proxy Cache plugin accelerates performance by caching responses based on configurable response codes, content types, and request methods. When caching is enabled, upstream services are not bogged down with repetitive requests, because Kong Gateway responds on their behalf with cached results. Caching can be enabled on specific Kong Gateway objects or for all requests globally.
Cache Time To Live (TTL)
TTL governs the refresh rate of cached content, which is critical for ensuring that clients aren’t served outdated content. A TTL of 30 seconds means content older than 30 seconds is deemed expired and will be refreshed on subsequent requests. TTL configurations should be set differently based on the type of the content the upstream service is serving.
Static data that is rarely updated can have longer TTL
Dynamic data should use shorter TTL to avoid serving outdated data
Kong Gateway follows RFC-7234 section 5.2 for cached controlled operations. See the specification and the Proxy Cache plugin parameter reference for more details on TTL configurations.
The following tutorial walks through managing proxy caching across various aspects in Kong Gateway.
This chapter is part of the Get Started with Kong series. For the best experience, it is recommended that you follow the series from the beginning.
Start with the introduction Get Kong, which includes a list of prerequisites and instructions for running a local Kong Gateway.
Step two of the guide, Services and Routes, includes instructions for installing a mock service used throughout this series.
If you haven’t completed these steps already, complete them before proceeding.
Global proxy caching
Installing the plugin globally means every proxy request to Kong Gateway will potentially be cached.
Enable proxy caching
The Proxy Cache plugin is installed by default on Kong Gateway, and can be enabled by sending a
POSTrequest to the plugins object on the Admin API:
curl -i -X POST http://localhost:8001/plugins \ --data "name=proxy-cache" \ --data "config.request_method=GET" \ --data "config.response_code=200" \ --data "config.content_type=application/json; charset=utf-8" \ --data "config.cache_ttl=30" \ --data "config.strategy=memory"
If configuration was successful, you will receive a
This Admin API request configured a Proxy Cache plugin for all
GETrequests that resulted in response codes of
Content-Typeheaders that equal
cache_ttlinstructed the plugin to flush values after 30 seconds.
The final option
config.strategy=memoryspecifies the backing data store for cached responses. More information on
strategycan be found in the parameter reference for the Proxy Cache plugin.
You can check that the Proxy Cache plugin is working by sending
GETrequests and examining the returned headers. In step two of this guide, services and routes, you setup a
/mockroute and service that can help you see proxy caching in action.
First, make an initial request to the
/mockroute. The Proxy Cache plugin returns status information headers prefixed with
X-Cache, so use
grepto filter for that information:
curl -i -s -XGET http://localhost:8000/mock/requests | grep X-Cache
On the initial request, there should be no cached responses, and the headers will indicate this with
X-Cache-Key: c9e1d4c8e5fd8209a5969eb3b0e85bc6 X-Cache-Status: Miss
Within 30 seconds of the initial request, repeat the command to send an identical request and the headers will indicate a cache
X-Cache-Key: c9e1d4c8e5fd8209a5969eb3b0e85bc6 X-Cache-Status: Hit
X-Cache-Statusheaders can return the following cache results:
State Description Miss The request could be satisfied in cache, but an entry for the resource was not found in cache, and the request was proxied upstream. Hit The request could be satisfied in cache, but an entry for the resource was not found in cache, and the request was proxied upstream. Refresh The resource was found in cache, but could not satisfy the request, due to Cache-Control behaviors or reaching its hard-coded
Bypass The request could not be satisfied from cache based on plugin configuration.
Service level proxy caching
The Proxy Cache plugin can be enabled for specific services. The request is the same as above, but the request is sent to the service URL:
curl -X POST http://localhost:8001/services/example_service/plugins \ --data "name=proxy-cache" \ --data "config.request_method=GET" \ --data "config.response_code=200" \ --data "config.content_type=application/json; charset=utf-8" \ --data "config.cache_ttl=30" \ --data "config.strategy=memory"
Route level proxy caching
The Proxy Caching plugin can be enabled for specific routes. The request is the same as above, but the request is sent to the route URL:
curl -X POST http://localhost:8001/routes/example_route/plugins \ --data "name=proxy-cache" \ --data "config.request_method=GET" \ --data "config.response_code=200" \ --data "config.content_type=application/json; charset=utf-8" \ --data "config.cache_ttl=30" \ --data "config.strategy=memory"
Consumer level proxy caching
In Kong Gateway, consumers are an abstraction that defines a user of a service. Consumer-level proxy caching can be used to cache responses per consumer.
- Create a consumer
Consumers are created using the consumer object in the Admin API.
curl -X POST http://localhost:8001/consumers/ \ --data username=sasha
- Enable caching for the consumer
curl -X POST http://localhost:8001/consumers/sasha/plugins \ --data "name=proxy-cache" \ --data "config.request_method=GET" \ --data "config.response_code=200" \ --data "config.content_type=application/json; charset=utf-8" \ --data "config.cache_ttl=30" \ --data "config.strategy=memory"
Manage cached entities
The Proxy Cache plugin supports administrative endpoints to manage cached entities. Administrators can view and delete cached entities, or purge the entire cache by sending requests to the Admin API.
To retrieve the cached entity, submit a request to the Admin API
/proxy-cache endpoint with the
X-Cache-Key value of a known cached value. This request must be submitted prior to the TTL expiration,
otherwise the cached entity has been purged.
For example, using the response headers above, pass the
X-Cache-Key value of
c9e1d4c8e5fd8209a5969eb3b0e85bc6 to the Admin API:
curl -i http://localhost:8001/proxy-cache/c9e1d4c8e5fd8209a5969eb3b0e85bc6
A response with
200 OK will contain full details of the cached entity.
See the Proxy Cache plugin documentation for the full list of the Proxy Cache specific Admin API endpoints.