You are browsing documentation for an older version. See the latest documentation here.
Zone Ingress
To implement cross-zone communication when Kong Mesh is deployed in a multi-zone mode, there is a new proxy type ZoneIngress
.
These proxies are not attached to any particular workload. Instead, they are bound to that particular zone.
Zone Ingress can proxy the traffic between all meshes, so we need only one deployment in each zone.
All requests that are sent from one zone to another will be directed to the proper instance by the Zone Ingress.
Because
ZoneIngress
uses Service Name Indication (SNI) to route traffic, mTLS is required to do cross zone communication.
The ZoneIngress
entity includes a few sections:
-
type
: must beZoneIngress
. -
name
: this is the name of the Zone Ingress instance, and it must be unique for any givenzone
. -
networking
: contains networking parameters of the Zone Ingress-
address
: the address of the network interface Zone Ingress is listening on. Could be the address of either public or private network interface, but the latter must be used with a load balancer. -
port
: is a port that Zone Ingress is listening on default to 10001 -
advertisedAddress
: an IP address or hostname which will be used to communicate with the Zone Ingress. Zone Ingress doesn’t listen on this address. If Zone Ingress is exposed using a load balancer, then the address of the load balancer should be used here. If Zone Ingress is listening on the public network interface, then the address of the public network interface should be used here. -
advertisedPort
: a port which will be used to communicate with the Zone Ingress. Zone Ingress doesn’t listen on this port. -
admin
: determines parameters related to Envoy Admin API-
port
: the port that Envoy Admin API will listen to
-
-
-
availableServices
[auto-generated on Kong Mesh CP] : the list of services that could be consumed through the Zone Ingress -
zone
[auto-generated on Kong Mesh CP] : zone where Zone Ingress is running
Zone Ingress without advertisedAddress
and advertisedPort
is not taken into account when generating Envoy configuration, because they cannot be accessed by data plane proxies from other zones.
A ZoneIngress
deployment can be scaled horizontally. Many instances can have the same advertised address and advertised port because they can be put behind one load balancer.