Skip to content
|
Plugin Hub
github-edit-pageEdit this page
report-issueReport an issue
header icon

Basic config examples for StatsD

By Kong Inc.

Basic configuration examples

The following examples provide some typical configurations for enabling the statsd plugin on a service.

Make the following request:

curl -X POST http://localhost:8001/services/{serviceName|Id}/plugins \
    --header "accept: application/json" \
    --header "Content-Type: application/json" \
    --data '
    {
  "name": "statsd",
  "config": {
    "host": "127.0.0.1",
    "port": 8125,
    "allow_status_codes": [
      "200-205",
      "400-499"
    ],
    "flush_timeout": 2,
    "retry_count": 10
  }
}
    '

Replace SERVICE_NAME|ID with the id or name of the service that this plugin configuration will target.

Make the following request, substituting your own access token, region, control plane ID, and service ID:

curl -X POST \
https://{us|eu}.api.konghq.com/v2/control-planes/{controlPlaneId}/core-entities/services/{serviceId}/plugins \
    --header "accept: application/json" \
    --header "Content-Type: application/json" \
    --header "Authorization: Bearer TOKEN" \
    --data '{"name":"statsd","config":{"host":"127.0.0.1","port":8125,"allow_status_codes":["200-205","400-499"],"flush_timeout":2,"retry_count":10}}'

See the Konnect API reference to learn about region-specific URLs and personal access tokens.

First, create a KongPlugin resource:

echo "
apiVersion: configuration.konghq.com/v1
kind: KongPlugin
metadata:
  name: statsd-example
plugin: statsd
config:
  host: 127.0.0.1
  port: 8125
  allow_status_codes:
  - 200-205
  - 400-499
  flush_timeout: 2
  retry_count: 10
" | kubectl apply -f -

Next, apply the KongPlugin resource to an ingress by annotating the service as follows:

kubectl annotate service SERVICE_NAME konghq.com/plugins=statsd-example

Replace SERVICE_NAME with the name of the service that this plugin configuration will target. You can see your available ingresses by running kubectl get service.

Note: The KongPlugin resource only needs to be defined once and can be applied to any service, consumer, or route in the namespace. If you want the plugin to be available cluster-wide, create the resource as a KongClusterPlugin instead of KongPlugin.

Add this section to your declarative configuration file:

plugins:
- name: statsd
  service: SERVICE_NAME|ID
  config:
    host: 127.0.0.1
    port: 8125
    allow_status_codes:
    - 200-205
    - 400-499
    flush_timeout: 2
    retry_count: 10

Replace SERVICE_NAME|ID with the id or name of the service that this plugin configuration will target.

Prerequisite: Configure your Personal Access Token 
terraform {
  required_providers {
    konnect = {
      source  = "kong/konnect"
    }
  }
}

provider "konnect" {
  personal_access_token = "kpat_YOUR_TOKEN"
  server_url            = "https://us.api.konghq.com/"
}

Add the following to your Terraform configuration to create a Konnect Gateway Plugin:

resource "konnect_gateway_plugin_statsd" "my_statsd" {
  enabled = true

  config = {
    host = "127.0.0.1"
    port = 8125
    allow_status_codes = ["200-205", "400-499"]
    flush_timeout = 2
    retry_count = 10
  }

  control_plane_id = konnect_gateway_control_plane.my_konnect_cp.id
  service = {
    id = konnect_gateway_service.my_service.id
  }
}

The following examples provide some typical configurations for enabling the statsd plugin on a route.

Make the following request:

curl -X POST http://localhost:8001/routes/{routeName|Id}/plugins \
    --header "accept: application/json" \
    --header "Content-Type: application/json" \
    --data '
    {
  "name": "statsd",
  "config": {
    "host": "127.0.0.1",
    "port": 8125,
    "allow_status_codes": [
      "200-205",
      "400-499"
    ],
    "flush_timeout": 2,
    "retry_count": 10
  }
}
    '

Replace ROUTE_NAME|ID with the id or name of the route that this plugin configuration will target.

Make the following request, substituting your own access token, region, control plane ID, and route ID:

curl -X POST \
https://{us|eu}.api.konghq.com/v2/control-planes/{controlPlaneId}/core-entities/routes/{routeId}/plugins \
    --header "accept: application/json" \
    --header "Content-Type: application/json" \
    --header "Authorization: Bearer TOKEN" \
    --data '{"name":"statsd","config":{"host":"127.0.0.1","port":8125,"allow_status_codes":["200-205","400-499"],"flush_timeout":2,"retry_count":10}}'

See the Konnect API reference to learn about region-specific URLs and personal access tokens.

First, create a KongPlugin resource:

echo "
apiVersion: configuration.konghq.com/v1
kind: KongPlugin
metadata:
  name: statsd-example
plugin: statsd
config:
  host: 127.0.0.1
  port: 8125
  allow_status_codes:
  - 200-205
  - 400-499
  flush_timeout: 2
  retry_count: 10
" | kubectl apply -f -

Next, apply the KongPlugin resource to an ingress by annotating the ingress as follows:

kubectl annotate ingress INGRESS_NAME konghq.com/plugins=statsd-example

Replace INGRESS_NAME with the name of the ingress that this plugin configuration will target. You can see your available ingresses by running kubectl get ingress.

Note: The KongPlugin resource only needs to be defined once and can be applied to any service, consumer, or route in the namespace. If you want the plugin to be available cluster-wide, create the resource as a KongClusterPlugin instead of KongPlugin.

Add this section to your declarative configuration file:

plugins:
- name: statsd
  route: ROUTE_NAME|ID
  config:
    host: 127.0.0.1
    port: 8125
    allow_status_codes:
    - 200-205
    - 400-499
    flush_timeout: 2
    retry_count: 10

Replace ROUTE_NAME|ID with the id or name of the route that this plugin configuration will target.

Prerequisite: Configure your Personal Access Token 
terraform {
  required_providers {
    konnect = {
      source  = "kong/konnect"
    }
  }
}

provider "konnect" {
  personal_access_token = "kpat_YOUR_TOKEN"
  server_url            = "https://us.api.konghq.com/"
}

Add the following to your Terraform configuration to create a Konnect Gateway Plugin:

resource "konnect_gateway_plugin_statsd" "my_statsd" {
  enabled = true

  config = {
    host = "127.0.0.1"
    port = 8125
    allow_status_codes = ["200-205", "400-499"]
    flush_timeout = 2
    retry_count = 10
  }

  control_plane_id = konnect_gateway_control_plane.my_konnect_cp.id
  route = {
    id = konnect_gateway_route.my_route.id
  }
}

The following examples provide some typical configurations for enabling the statsd plugin on a consumer.

Make the following request:

curl -X POST http://localhost:8001/consumers/{consumerName|Id}/plugins \
    --header "accept: application/json" \
    --header "Content-Type: application/json" \
    --data '
    {
  "name": "statsd",
  "config": {
    "host": "127.0.0.1",
    "port": 8125,
    "allow_status_codes": [
      "200-205",
      "400-499"
    ],
    "flush_timeout": 2,
    "retry_count": 10
  }
}
    '

Replace CONSUMER_NAME|ID with the id or name of the consumer that this plugin configuration will target.

Make the following request, substituting your own access token, region, control plane ID, and consumer ID:

curl -X POST \
https://{us|eu}.api.konghq.com/v2/control-planes/{controlPlaneId}/core-entities/consumers/{consumerId}/plugins \
    --header "accept: application/json" \
    --header "Content-Type: application/json" \
    --header "Authorization: Bearer TOKEN" \
    --data '{"name":"statsd","config":{"host":"127.0.0.1","port":8125,"allow_status_codes":["200-205","400-499"],"flush_timeout":2,"retry_count":10}}'

See the Konnect API reference to learn about region-specific URLs and personal access tokens.

First, create a KongPlugin resource:

echo "
apiVersion: configuration.konghq.com/v1
kind: KongPlugin
metadata:
  name: statsd-example
plugin: statsd
config:
  host: 127.0.0.1
  port: 8125
  allow_status_codes:
  - 200-205
  - 400-499
  flush_timeout: 2
  retry_count: 10
" | kubectl apply -f -

Next, apply the KongPlugin resource to an ingress by annotating the KongConsumer object as follows:

kubectl annotate KongConsumer CONSUMER_NAME konghq.com/plugins=statsd-example

Replace CONSUMER_NAME with the name of the consumer that this plugin configuration will target. You can see your available consumers by running kubectl get KongConsumer.

To learn more about KongConsumer objects, see Provisioning Consumers and Credentials.

Note: The KongPlugin resource only needs to be defined once and can be applied to any service, consumer, or route in the namespace. If you want the plugin to be available cluster-wide, create the resource as a KongClusterPlugin instead of KongPlugin.

Add this section to your declarative configuration file:

plugins:
- name: statsd
  consumer: CONSUMER_NAME|ID
  config:
    host: 127.0.0.1
    port: 8125
    allow_status_codes:
    - 200-205
    - 400-499
    flush_timeout: 2
    retry_count: 10

Replace CONSUMER_NAME|ID with the id or name of the consumer that this plugin configuration will target.

Prerequisite: Configure your Personal Access Token 
terraform {
  required_providers {
    konnect = {
      source  = "kong/konnect"
    }
  }
}

provider "konnect" {
  personal_access_token = "kpat_YOUR_TOKEN"
  server_url            = "https://us.api.konghq.com/"
}

Add the following to your Terraform configuration to create a Konnect Gateway Plugin:

resource "konnect_gateway_plugin_statsd" "my_statsd" {
  enabled = true

  config = {
    host = "127.0.0.1"
    port = 8125
    allow_status_codes = ["200-205", "400-499"]
    flush_timeout = 2
    retry_count = 10
  }

  control_plane_id = konnect_gateway_control_plane.my_konnect_cp.id
  consumer = {
    id = konnect_gateway_consumer.my_consumer.id
  }
}

A plugin which is not associated to any service, route, consumer, or consumer group is considered global, and will be run on every request.

  • In self-managed Kong Gateway Enterprise, the plugin applies to every entity in a given workspace.
  • In self-managed Kong Gateway (OSS), the plugin applies to your entire environment.
  • In Konnect, the plugin applies to every entity in a given control plane.

Read the Plugin Reference and the Plugin Precedence sections for more information.

The following examples provide some typical configurations for enabling the StatsD plugin globally.

Make the following request:

curl -X POST http://localhost:8001/plugins/ \
    --header "accept: application/json" \
    --header "Content-Type: application/json" \
    --data '
    {
  "name": "statsd",
  "config": {
    "host": "127.0.0.1",
    "port": 8125,
    "allow_status_codes": [
      "200-205",
      "400-499"
    ],
    "flush_timeout": 2,
    "retry_count": 10
  }
}
    '

Make the following request, substituting your own access token, region, and control plane ID:

curl -X POST \
https://{us|eu}.api.konghq.com/v2/control-planes/{controlPlaneId}/core-entities/plugins/ \
    --header "accept: application/json" \
    --header "Content-Type: application/json" \
    --header "Authorization: Bearer TOKEN" \
    --data '{"name":"statsd","config":{"host":"127.0.0.1","port":8125,"allow_status_codes":["200-205","400-499"],"flush_timeout":2,"retry_count":10}}'

See the Konnect API reference to learn about region-specific URLs and personal access tokens.

Create a KongClusterPlugin resource and label it as global:

apiVersion: configuration.konghq.com/v1
kind: KongClusterPlugin
metadata:
  name: <global-statsd>
  annotations:
    kubernetes.io/ingress.class: kong
  labels:
    global: "true"
config:
  host: 127.0.0.1
  port: 8125
  allow_status_codes:
  - 200-205
  - 400-499
  flush_timeout: 2
  retry_count: 10
plugin: statsd

Add a plugins entry in the declarative configuration file:

plugins:
- name: statsd
  config:
    host: 127.0.0.1
    port: 8125
    allow_status_codes:
    - 200-205
    - 400-499
    flush_timeout: 2
    retry_count: 10
Prerequisite: Configure your Personal Access Token 
terraform {
  required_providers {
    konnect = {
      source  = "kong/konnect"
    }
  }
}

provider "konnect" {
  personal_access_token = "kpat_YOUR_TOKEN"
  server_url            = "https://us.api.konghq.com/"
}

Add the following to your Terraform configuration to create a Konnect Gateway Plugin:

resource "konnect_gateway_plugin_statsd" "my_statsd" {
  enabled = true

  config = {
    host = "127.0.0.1"
    port = 8125
    allow_status_codes = ["200-205", "400-499"]
    flush_timeout = 2
    retry_count = 10
  }

  control_plane_id = konnect_gateway_control_plane.my_konnect_cp.id
}