Skip to content
|
Kong Gateway
unreleased
github-edit-pageEdit this page
report-issueReport an issue
You are browsing unreleased documentation. See the latest documentation here.

Authenticate your Kong Gateway Amazon RDS database with AWS IAM

Starting in Kong Gateway 3.3.x, you can use AWS Identity and Access Management (IAM) authentication to connect to the AWS RDS database that you use for Kong Gateway. This page describes how to use this feature to secure your database configurations and database connections.

When you enable this feature, you don’t need to use a password when you connect to a database instance. Instead, you use a temporary authentication token. Because AWS IAM manages the authentication externally, the database doesn’t store user credentials. If you use AWS RDS for Kong Gateway’s database, you can enable this feature on your running cluster. This ensures that you don’t have to store database user credentials on both the Kong Gateway (pg_password) and RDS database side.

AWS IAM authentication limitations

AWS IAM authentication also has some limitations. Go through each one before you use this feature in your production environment:

  • For a traditional Kong Gateway cluster or single traditional nodes, only use IAM database authentication if Kong Gateway requires less than 200 new IAM database authentications per second. Establishing more connections per second can result in throttling. Authentication only happens on each connection’s initialization part after the connection is successfully established; the following queries and communication don’t authenticate. Check the TPS of the connection establishment on your database to ensure you aren’t encountering this limitation. Traditional clusters are more likely to encounter this limitation because each node needs to establish connections to the database. For more information, see Recommendations for IAM database authentication in the Amazon RDS user guide.
  • Enabling AWS IAM authentication requires SSL connection to the database. To do this, you must configure your RDS cluster correctly and provide the correct SSL-related configurations on Kong Gateway’s side. Enabling SSL also results in some performance overhead if you didn’t previously use it. Currently, TLSv1.3 isn’t supported by AWS RDS.
  • Since the Postgres RDS does not support mTLS, you can’t enable mTLS between the Kong Gateway and the Postgres RDS database when AWS IAM authentication is enabled.
  • You can’t change the value of the environment variables that you use for the AWS credential after booting Kong Gateway.

For additional recommendations and limitations, see IAM database authentication for MariaDB, MySQL, and PostgreSQL in the Amazon RDS user guide.

Prerequisites

Before you enable the AWS IAM authentication, you must configure your AWS RDS database and the AWS IAM role that Kong Gateway uses.

  • Enable the IAM database authentication on your database instance. For more information, see Enabling and disabling IAM database authentication in the Amazon RDS user guide.
  • Assign an IAM role to your Kong Gateway instance. Kong Gateway can automatically discover and fetch the AWS credentials to use for the IAM role.
    • If you use an EC2 environment, use the EC2 IAM role.
    • If you use an ECS cluster, use a ECS task IAM role.

    • If you use an EKS cluster, configure a Kubernetes service account that can annotate your assigned role and configure the pods to use an IAM role defined by serviceaccount.

      Using an IAM role defined by serviceaccount requires a request to the AWS STS service, so you also need to make sure that your Kong instance inside the Pod can access the AWS STS service endpoint.

      If you’re using STS regional endpoints, make sure you have AWS_STS_REGIONAL_ENDPOINTS defined in your environment variables.

    • If you run Kong Gateway locally, use the environment variables, like access key and secret key combination by using AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY, or profile and credential file combination by using AWS_PROFILE and AWS_SHARED_CREDENTIALS_FILE

    Warning: You can’t change the value of the environment variables you used to provide the AWS credential after booting Kong Gateway. Any changes are ignored.

    Note: IAM Identity Center credential provider and Process credential provider are not supported.

    • If you want to assume a role, make sure the original IAM role that Kong uses has the correct permission to assume the role of the target IAM role, and the target IAM role has the correct permission to connect to the database using IAM authentication.
    • If you have users with non-public VPC networks and private VPC endpoints (without private DNS names enabled), you can configure an AWS Service Token Service (STS) endpoint globally with vault_aws_sts_endpoint_url or on a custom AWS Vault entity with sts_endpoint_url.

  • Assign an IAM policy to the Kong Gateway IAM role. For more information, see Creating and using an IAM policy for IAM database access in the Amazon RDS documentation.

  • Ensure you create the database account in the RDS. For more information, see Using IAM authentication with PostgreSQL in the Amazon RDS documentation.

    Notes:

    • The database user assigned to the rds_iam role can only use the IAM database authentication.
    • Make sure to create the database and grant the correct permissions to the database user you just created. See Using a database for more information.

Enabling AWS IAM authentication

You can enable AWS IAM authentication by using an environment variable or using the Kong Gateway configuration file. You can either enable this feature in both read-only and read-write mode, or just enable it in read-only mode.

Note: When the AWS IAM authentication is enabled, Kong Gateway will ignore the related password configs. Enabling the authentication only in read-only mode will not influence the read-write related configs, so pg_user and pg_password function normally.

Before you enable AWS IAM authentication, you must do the following in the kong.conf file:

  • Remove pg_password or pg_ro_password.
  • Check that pg_user or pg_ro_user matches the username you defined in the IAM policy and created in the Postgres RDS database.

Enable AWS IAM authentication with environment variables

To enable AWS IAM authentication in read-write and read-only mode, set the KONG_PG_IAM_AUTH environment variable to on:

KONG_PG_IAM_AUTH=on

To enable AWS IAM authentication in read-only mode, you can set the following:

KONG_PG_IAM_AUTH=off # This line can be omitted because off is the default value
KONG_PG_RO_IAM_AUTH=on

If you want to assume a role, also set the following environment variables:

# For read-write connections
KONG_PG_IAM_AUTH_ASSUME_ROLE_ARN=<role_arn>
KONG_PG_IAM_AUTH_ROLE_SESSION_NAME=<role_session_name>

# Optional, specify the custom STS endpoint URL used for the IAM assume role
# This value will override the default STS endpoint URL, which should be
# `https://sts.amazonaws.com`, or `https://sts.<region>.amazonaws.com` if
# `AWS_STS_REGIONAL_ENDPOINTS` is set to `regional`(by default).
# If you are not using a private VPC endpoint for STS service, you should
# not specify this value
KONG_PG_IAM_AUTH_STS_ENDPOINT_URL=https://your.endpoint.to.aws.sts.service.amazonaws.com

# For read-only connections, if you need a different role than for read-write
KONG_PG_RO_IAM_AUTH_ASSUME_ROLE_ARN=<role_arn>
KONG_PG_RO_IAM_AUTH_ROLE_SESSION_NAME=<role_session_name>
# Optional, same as KONG_PG_IAM_AUTH_STS_ENDPOINT_URL
KONG_PG_RO_IAM_AUTH_STS_ENDPOINT_URL=https://your.endpoint.to.aws.sts.service.amazonaws.com

Enable AWS IAM authentication in the configuration file

The kong.conf file contains the pg_iam_auth and pg_ro_iam_auth properties. Just like the environment variable, you can set them to on accordingly, if you want to enable the IAM Authentication on both read and write connection, or just read-only connection to the RDS Postgres database.

To enable AWS IAM authentication in read-write mode, set pg_iam_auth to on:

pg_iam_auth=on

To enable AWS IAM authentication in read-only mode, set pg_ro_iam_auth to on:

pg_ro_iam_auth=on

If you want to assume a role, also set the following configuration parameters:

# For read-write connections
pg_iam_auth_assume_role_arn=<role_arn>
pg_iam_auth_role_session_name=<role_session_name>
# Optional, specify the custom STS endpoint URL used for the IAM assume role
# This value will override the default STS endpoint URL, which should be
# `https://sts.amazonaws.com`, or `https://sts.<region>.amazonaws.com` if
# `AWS_STS_REGIONAL_ENDPOINTS` is set to `regional`(by default).
# If you are not using a private VPC endpoint for STS service, you should
# not specify this value
pg_iam_auth_sts_endpoint_url=https://your.endpoint.to.aws.sts.service.amazonaws.com

# For read-only connections, if you need a different role than for read-write
pg_ro_iam_auth_assume_role_arn=<role_arn>
pg_ro_iam_auth_role_session_name=<role_session_name>
# Optional, same as `pg_iam_auth_sts_endpoint_url`
pg_ro_iam_auth_sts_endpoint_url=https://your.endpoint.to.aws.sts.service.amazonaws.com

Note: If you enable AWS IAM authentication in the configuration file, you must specify the configuration file with the feature property on when you run the migrations command. For example, kong migrations bootstrap -c /path/to/kong.conf.