You are browsing documentation for an older version. See the latest documentation here.
Keyring and Data Encryption
Kong Gateway provides a mechanism to store sensitive data fields, such as consumer secrets, in an encrypted format within the database. This provides for encryption-at-rest security controls in a Kong cluster.
This functionality provides transparent, symmetric encryption of sensitive data fields at rest. Transparency refers to the fact that, when enabled, encryption/decryption of data is done on-the-fly by Kong immediately before writing/immediately after reading from the database. Responses generated by the Admin API containing sensitive fields continue to show data as plaintext, and runtime elements of Kong (such as plugins) that require access to sensitive fields do so transparently, without requiring additional configuration.
Getting Started
This document provides a brief introduction to leveraging Kong Gateway symmetric database encryption to store sensitive configuration data in a Kong cluster. This document covers necessary Kong configuration settings and key management lifecycle procedures when using database encryption in cluster
mode. This mode offers the simplest method to getting started, as it requires no external dependencies.
Generate a Management RSA Key Pair
Before enabling database encryption, we strongly recommend you generate an RSA key pair for use in exporting and recovering keyring material. If keyring material is lost, it is impossible to recover any sensitive data fields written to the database with a key on that keyring.
Generating an RSA key pair is straightforward via the openssl
CLI:
openssl genrsa -out key.pem 2048
openssl rsa -in key.pem -pubout -out cert.pem
This key pair will be provided to Kong in order to facilitate recovering, exporting, and re-importing the keyring. The public cert.pem
and private key.pem
should be stored securely in accordance with your existing secrets management policies. Details on secure storage of RSA key pairs are outside the scope of this documentation.
Configure Kong for database encryption
Enabling data encryption in Kong requires modifying the Kong configuration. Set the following values in kong.conf
:
keyring_enabled = on
keyring_strategy = cluster
keyring_recovery_public_key = /path/to/generated/cert.pem
Or via environmental variables:
export KONG_KEYRING_ENABLED=on
export KONG_KEYRING_STRATEGY=cluster
export KONG_KEYRING_RECOVERY_PUBLIC_KEY=/path/to/generated/cert.pem
All nodes in the Kong cluster should share the same keyring_enabled
and keyring_strategy
configuration values.
The generated private key key.pem
is not required to configure Kong, or to start Kong. Please refer to the disaster recovery section for more information on how to use private keys in keyring management.
Start Kong
Once all Kong nodes in the cluster have been configured, start each node:
kong start
When encryption is enabled on a Kong node, it checks the status of the cluster keyring on boot. If it detects that no keys are present in the keyring, it will generate a key automatically. This process allows encryption/decryption operations to begin immediately.
For all other nodes, the generated key will be automatically distributed within a few seconds.
Note that encryption keys are held only in memory, and do not persist past a restart of the Kong process (e.g., running kong restart
). Because of this limitation, you must recover or import the keyring following initialization. Otherwise, if all Kong nodes in a cluster restart simultaneously, any sensitive fields written with the keyring become unrecoverable. Key material still persists after a soft reload of Kong (i.e., kong reload
).
Verify the Cluster Keyring
With the keyring enabled and Kong started, verify the contents of the keyring:
curl -s localhost:8001/keyring | jq
Response:
{
"ids": [
"LaW1urRQ"
],
"active": "LaW1urRQ"
}
Note that in this example, the value LaW1urRQ
is the ID of the key, not the key material itself.
Exercise the Encryption Routines
Create a Consumer with a basic-auth credential. At this point, the password
field of the basic-auth credential will be symmetrically encrypted before it is written to the database (in addition to being hashed by the basic-auth plugin, which is done by the plugin regardless of whether keyring encryption is enabled):
curl -s localhost:8001/consumers -d username=bob | jq
Response:
{
"custom_id": null,
"created_at": 1576518610,
"id": "6375b5fd-9c95-4822-b2dd-80ffbccb7ec9",
"tags": null,
"username": "bob",
"type": 0
}
curl -s localhost:8001/consumers/bob/basic-auth -d username=bob -d password=supersecretpassword | jq
Response:
{
"created_at": 1576518704,
"consumer": {
"id": "6375b5fd-9c95-4822-b2dd-80ffbccb7ec9"
},
"id": "fc46ce48-c1d6-4078-9f51-5a777350a8a2",
"password": "da61c0083b6d19ef3db2490d0da96a71572da0fa",
"username": "bob"
}
Note that the returned password
field in the API response is not the encrypted value; database encryption does not modify responses generated by the Admin API. This allows existing workflows to continue in the same form, while providing encryption at rest security under the hood. We can verify this by examining the value stored in the database:
kong=# select id,password from basicauth_credentials;
id | password
--------------------------------------+---------------------------------------------------------------------------------------------------------------------------
fc46ce48-c1d6-4078-9f51-5a777350a8a2 | $ke$1$-LaW1urRQ-0f5b1ee8ddeefca1a1d75125-53f158a5f619133a2113692a7057e2b91fa947321de4480d452dd42c36bc9ef8aa6499cd429db6d7
(1 row)
We can also verify that reading back the credential after it has been created behaves as expected:
curl -s localhost:8001/consumers/bob/basic-auth/fc46ce48-c1d6-4078-9f51-5a777350a8a2 | jq
Response:
{
"created_at": 1576518704,
"consumer": {
"id": "6375b5fd-9c95-4822-b2dd-80ffbccb7ec9"
},
"id": "fc46ce48-c1d6-4078-9f51-5a777350a8a2",
"password": "da61c0083b6d19ef3db2490d0da96a71572da0fa",
"username": "bob"
}
Rotating Key Material
As noted above, Kong supports rotating keys by allowing for multiple keys to exist on the keyring at the same time. This allows for data fields written by one key to be read back, while a fresher encryption key is used for write operations. Rotating keys is a matter of importing or generating a new key into the keyring, and marking it as active. Arbitrary key material can be imported via the /keyring/import
material, or Kong can generate a new key via /keyring/generate
endpoint:
curl -XPOST -s localhost:8001/keyring/generate
Response:
{
"key": "t6NWgbj3g9cbNVC3/D6oZ2Md1Br5gWtRrqb1T2FZy44=",
"id": "8zgITLQh"
}
Note that as a convenience the raw key material is returned from this endpoint call.
Once a new key is present in the keyring, activate the key’s ID:
curl -s localhost:8001/keyring/activate -d key=8zgITLQh
Kong can write new sensitive data fields with the current active
key, and read previously written fields in the database with the prior key, provided that key is in the keyring. Kong automatically selects the appropriate key to use when decrypting fields from the database.
At this point, it is encouraged to take another backup of the keyring via the /keyring/export
Admin API endpoint.
Rotating Encrypted Data Fields
Once the keyring has updated, existing encrypted fields can rotate to use the new active key. To accomplish this rotation, issue a PATCH request to the entity in question:
curl -XPATCH -s localhost:8001/consumers/bob/basic-auth/fc46ce48-c1d6-4078-9f51-5a777350a8a2 -d password=adifferentsecretpassword | jq
Response:
{
"created_at": 1576518704,
"consumer": {
"id": "6375b5fd-9c95-4822-b2dd-80ffbccb7ec9"
},
"id": "fc46ce48-c1d6-4078-9f51-5a777350a8a2",
"password": "cc7274e94e41f3e00c238ff8712d1a83693f2a89",
"username": "bob"
}
Again, note that the encryption behavior is transparent to the Admin API response. Under the hood, Kong reads the entity’s password
field with a read-only encryption key. As part of the PATCH process, Kong writes the password
field back to the database with the new active
key. To verify this process, examine the raw contents of the database:
kong=# select id,password from basicauth_credentials;
id | password
--------------------------------------+---------------------------------------------------------------------------------------------------------------------------
fc46ce48-c1d6-4078-9f51-5a777350a8a2 | $ke$1$-8zgITLQh-b8d28531252241e6b95907e4-0768a9a4baaa2c777d9406d4e3098d813be55ae82c4c849182b06b9c5954704c6290c9e677bcd693
(1 row)
Note that the key identifier within the password data blob has been updated. This rotation mechanism allows organizations to meet specific compliance needs around key management rotation and retention policies.
Currently, encrypted fields must undergo a direct write operation in order to rotate the encrypted field. Future releases of Kong may contain helper API operations to automate this process.
Exploring Missing Keyring Material Behavior
As a test, stop all Kong nodes in the cluster, and restart one Kong node again, but do not import the keyring material. The behavior of attempting to read an entity with an encrypted field now changes:
time curl -s localhost:8001/consumers/bob/basic-auth/fc46ce48-c1d6-4078-9f51-5a777350a8a2
Response:
{"message":"An unexpected error occurred"}
real 0m24.811s
user 0m0.017s
sys 0m0.006s
When the Kong node restarts, it sends a broadcast request for the keyring, but as no other nodes are present in the cluster (or no other nodes had the keyring available), Kong is unable to decrypt the password
field on the credential. Because Kong has an eventually-consistent clustering model, it makes several attempts to request the keyring and allows for delays in hearing responses from another cluster node; thus, the request takes several seconds to complete before finally failing.
Disaster Recovery
cluster
strategy supports two disaster recovery strategies.
Automatic backup and manual recovery
To use automatic backups for keyring materials, configure keyring_recovery_public_key
:
keyring_recovery_public_key = /path/to/generated/cert.pem
Or via environmental variables:
export KONG_KEYRING_RECOVERY_PUBLIC_KEY=/path/to/generated/cert.pem
Recover the Keyring
The keyring material is then encrypted with the public RSA key defined with the keyring_recovery_public_key
Kong configuration value in the database. The corresponding private key can be used to decrypt the keyring material in the database:
curl -X POST localhost:8001/keyring/recover -F recovery_private_key=@/path/to/generated/key.pem
Response:
{
"message": "successfully recovered 1 keys",
"recovered": [
"RfsDJ2Ol"
],
"not_recovered": [
"xSD219lH"
]
}
The response contains a list of keys that were successfully recovered and that could not be recovered. The Kong error log will contain the detailed reason why the keys could not be recovered.
Manual export and manual import
Use of this method is deprecated in Kong 3.0 and will be removed in a future release.
keyring_public_key = /path/to/generated/cert.pem
keyring_private_key = /path/to/generated/key.pem
Or via environmental variables:
export KONG_KEYRING_PUBLIC_KEY=/path/to/generated/cert.pem
export KONG_KEYRING_PRIVATE_KEY=/path/to/generated/key.pem
Not every node needs to be provided the management RSA key pair, as that key pair is only used for backup and recovery processes. It does not need to be present for regular database read/write operations.
The user that the Kong worker process is running under must have read access to the public and private keys in order to be able to import and export keyrings. This user is defined with the nginx_user
Kong configuration option. We recommend restricting access to these files, for example:
chown <nginx_user>:<nginx_user> /path/to/generated/cert.pem /path/to/generated/key.pem
chmod 400 /path/to/generated/cert.pem /path/to/generated/key.pem
When testing, you can set keyring_blob_path
in kong.conf or KONG_KEYRING_BLOB_PATH
using environmental variables to specify a path to dump known keys. The dumped keys are
encrypted with the public RSA key defined in the keyring_public_key
Kong configuration
value, and are automatically loaded when Kong starts.
Export the Keyring
Export the keyring. The exported material can be re-imported to the cluster in the event of an outage or to restore a previously-deleted key:
curl -XPOST -s localhost:8001/keyring/export | jq
Response:
{
"data": "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"
}
The response generated is an opaque blob containing the keyring. This blob is encrypted with
a randomly-generated symmetric key, which is encrypted with the public
RSA key defined via the keyring_public_key
Kong configuration value.
The exported keyring should be stored in a safe location for disaster recovery purposes. It is not designed to be modified or decrypted before being used during a disaster recovery process.
Import the Keyring
Restart Kong and re-import the previously exported keyring:
kong restart
curl localhost:8001/keyring/import -d data=<exported data>
This operation requires that the keyring_private_key
point to the private RSA
key associated with the public key used during the initial keyring export. Once
this is complete, Admin API operations that require the keyring for encryption/
decryption can be verified:
curl -s localhost:8001/consumers/bob/basic-auth/fc46ce48-c1d6-4078-9f51-5a777350a8a2 | jq
Response:
{
"created_at": 1576518704,
"consumer": {
"id": "6375b5fd-9c95-4822-b2dd-80ffbccb7ec9"
},
"id": "fc46ce48-c1d6-4078-9f51-5a777350a8a2",
"password": "da61c0083b6d19ef3db2490d0da96a71572da0fa",
"username": "bob"
}
Implementation Details
Encryption/Decryption
Kong Gateway uses 256-bit AES encryption in GCM mode. Cryptographic nonce values for each encryption routine execution are derived from the kernel CSPRNG (/dev/urandom
). The AES routines used by Kong are provided by the OpenSSL library bundled with the Kong Gateway package.
Key Generation and Lifecycle
Kong Gateway’s keyring handling mechanisms allow for more than one key to be present on any given Kong node at a time. Each key may be used to read encrypted fields from the database, but one and only one key at any given time is used to write encrypted fields back to the data store. This process allows for a key rotation mechanism wherein new keyring material is introduced, and older keys may be present for a time to allow rotating previously-encrypted fields.
Through the kernel CSPRNG, Kong derives keyring material generated through the /keyring/generate
Admin API endpoint. Kong stores keyring material in a shared memory zone that all Kong worker processes access. To prevent key material from being written to disk as part of memory paging operations, we recommend that swap be disabled on systems running Kong
When operating in cluster
mode, keyring material propagates automatically among all nodes in the Kong cluster. Because Kong nodes do not have a notion of direct peer-to-peer communication, the underlying data store serves as a communication channel to transmit messages. When a Kong node starts, it generates an ephemeral RSA key pair. The node’s public keys propagate to all other active nodes in the cluster. When an active node sees a message request for keyring material, it wraps the in-memory keyring material in the presented public key, and transmits the payload back over the central messaging channel provided by the underlying data store. This process allows each node in the cluster to broadcast keyring material to new nodes, without sending key material in plaintext over the wire. This model requires that at least one node be running at all times within the cluster; a failure of all nodes requires manually re-importing the keyring to one node during an outage recovery.
Encrypted Fields
The keyring module encrypts the following fields at rest:
-
key
fields ofcertificate
objects (corresponding to the private key of a TLS certificate). - Certain configuration parameters in plugins and plugin-related authentication objects. For information on which plugin fields are encrypted, see each individual plugin’s documentation.
Vault Integration
Kong’s keyring mechanism can integrate directly with HashiCorp Vault for keyring storage and versioning. In this model, Kong nodes read keyring material directly from a Vault KV secrets engine, rather than generating and disseminating keyring material around the cluster.
To configure Kong to use Vault for keyring storage, set the keyring_strategy
configuration value to vault
. Leveraging Vault also requires defining a host, mount point, and token or Kubernetes service account role for Vault access. See the configuration reference for more details.
Key Format
Kong leverages version 2 of the Vault KV secrets engine. This process allows for the same versioning and key rotation mechanisms that the cluster
keyring strategy provides. Each version of a KV secrets entry must contain both an id
field, and a key
field, e.g.:
{
"key": "t6NWgbj3g9cbNVC3/D6oZ2Md1Br5gWtRrqb1T2FZy44=",
"id": "8zgITLQh"
}
To provide consistent consumption of all Vault KV secrets, the underlying symmetric key is derived as the SHA256 of the key
component of the secret value. Take note of this derivation when extending or re-using symmetric encryption keys from other systems. This derivation also implies that the key
field can contain any arbitrary data, as Kong hashes the contents before importing the material into the keyring.
To provide a new key, add a new version to the Vault secrets engine at the configured path. The current_version
of the Vault secret denotes the active key in the keyring. See the KV v2 documentation for more detail.
Vault Permissions
In order to communicate with Vault, Kong Gateway must be provided with either:
- A Vault token.
- The Vault role applied to the Kubernetes service account of the running pod.
The token or Kubernetes auth role must be associated with a policy that allows the read
and list
actions on the path where keyring secrets are stored. Kong does not write keyring material to the Vault cluster.
Syncing the Keyring
Kong reads the keyring material from Vault when the Kong process starts. Any changes to the Vault KV store are not reflected on the Kong node until Kong syncs with Vault via the /keyring/vault/sync
Admin API endpoint. This allows Kong to receive a Vault token with a low TTL, as the list and read operation only occur once.
Keyring on hybrid mode
Because Keyring encrypts the data in the database, it means it doesn’t encrypt data on Kong data plane nodes that run without a database and get data from the control plane. However, one can turn on declarative_config_encryption_mode
within the Kong configuration, or use secrets management to securely store sensitive data on the data plane nodes.