Skip to content
|
search
Plugin Hub
report-issueReport an issue
header icon

AWS Request Signing Configuration Examples

By The LEGO Group

Configuration Examples

The following examples provide some typical configurations for enabling the aws-request-signing plugin on a service.

Make the following request:

curl -X POST http://localhost:8001/services/SERVICE_NAME|SERVICE_ID/plugins \
    --data "name=aws-request-signing"  \
    --data "config.aws_assume_role_arn=arn:aws:iam::123456789012:role/example-role"  \
    --data "config.aws_assume_role_name=example-role"  \
    --data "config.aws_region=us-east-1"  \
    --data "config.aws_service=lambda"  \
    --data "config.override_target_host=example.com"  \
    --data "config.override_target_port=443"  \
    --data "config.override_target_protocol=https"

Replace SERVICE_NAME|SERVICE_ID with the id or name of the service that this plugin configuration will target.

First, create a KongPlugin resource:

echo "
apiVersion: configuration.konghq.com/v1
kind: KongPlugin
metadata:
  name: aws-request-signing-example
plugin: aws-request-signing
config:
  aws_assume_role_arn: arn:aws:iam::123456789012:role/example-role
  aws_assume_role_name: example-role
  aws_region: us-east-1
  aws_service: lambda
  override_target_host: example.com
  override_target_port: 443
  override_target_protocol: https
" | kubectl apply -f -

Next, apply the KongPlugin resource to an ingress by annotating the service as follows:

kubectl annotate service SERVICE_NAME konghq.com/plugins=aws-request-signing-example

Replace SERVICE_NAME with the name of the service that this plugin configuration will target. You can see your available ingresses by running kubectl get service.

Note: The KongPlugin resource only needs to be defined once and can be applied to any service, consumer, or route in the namespace. If you want the plugin to be available cluster-wide, create the resource as a KongClusterPlugin instead of KongPlugin.

Add this section to your declarative configuration file:

plugins:
- name: aws-request-signing
  service: SERVICE_NAME|SERVICE_ID
  config:
    aws_assume_role_arn: arn:aws:iam::123456789012:role/example-role
    aws_assume_role_name: example-role
    aws_region: us-east-1
    aws_service: lambda
    override_target_host: example.com
    override_target_port: 443
    override_target_protocol: https

Replace SERVICE_NAME|SERVICE_ID with the id or name of the service that this plugin configuration will target.

The following examples provide some typical configurations for enabling the aws-request-signing plugin on a route.

Make the following request:

curl -X POST http://localhost:8001/routes/ROUTE_NAME|ROUTE_ID/plugins \
    --data "name=aws-request-signing"  \
    --data "config.aws_assume_role_arn=arn:aws:iam::123456789012:role/example-role"  \
    --data "config.aws_assume_role_name=example-role"  \
    --data "config.aws_region=us-east-1"  \
    --data "config.aws_service=lambda"  \
    --data "config.override_target_host=example.com"  \
    --data "config.override_target_port=443"  \
    --data "config.override_target_protocol=https"

Replace ROUTE_NAME|ROUTE_ID with the id or name of the route that this plugin configuration will target.

First, create a KongPlugin resource:

echo "
apiVersion: configuration.konghq.com/v1
kind: KongPlugin
metadata:
  name: aws-request-signing-example
plugin: aws-request-signing
config:
  aws_assume_role_arn: arn:aws:iam::123456789012:role/example-role
  aws_assume_role_name: example-role
  aws_region: us-east-1
  aws_service: lambda
  override_target_host: example.com
  override_target_port: 443
  override_target_protocol: https
" | kubectl apply -f -

Next, apply the KongPlugin resource to an ingress by annotating the ingress as follows:

kubectl annotate ingress INGRESS_NAME konghq.com/plugins=aws-request-signing-example

Replace INGRESS_NAME with the name of the ingress that this plugin configuration will target. You can see your available ingresses by running kubectl get ingress.

Note: The KongPlugin resource only needs to be defined once and can be applied to any service, consumer, or route in the namespace. If you want the plugin to be available cluster-wide, create the resource as a KongClusterPlugin instead of KongPlugin.

Add this section to your declarative configuration file:

plugins:
- name: aws-request-signing
  route: ROUTE_NAME|ROUTE_ID
  config:
    aws_assume_role_arn: arn:aws:iam::123456789012:role/example-role
    aws_assume_role_name: example-role
    aws_region: us-east-1
    aws_service: lambda
    override_target_host: example.com
    override_target_port: 443
    override_target_protocol: https

Replace ROUTE_NAME|ROUTE_ID with the id or name of the route that this plugin configuration will target.

The following examples provide some typical configurations for enabling the aws-request-signing plugin on a consumer.

Make the following request:

curl -X POST http://localhost:8001/consumers/CONSUMER_NAME|CONSUMER_ID/plugins \
    --data "name=aws-request-signing"  \
    --data "config.aws_assume_role_arn=arn:aws:iam::123456789012:role/example-role"  \
    --data "config.aws_assume_role_name=example-role"  \
    --data "config.aws_region=us-east-1"  \
    --data "config.aws_service=lambda"  \
    --data "config.override_target_host=example.com"  \
    --data "config.override_target_port=443"  \
    --data "config.override_target_protocol=https"

Replace CONSUMER_NAME|CONSUMER_ID with the id or name of the consumer that this plugin configuration will target.

in the same request, to further narrow the scope of the plugin.

First, create a KongPlugin resource:

echo "
apiVersion: configuration.konghq.com/v1
kind: KongPlugin
metadata:
  name: aws-request-signing-example
plugin: aws-request-signing
config:
  aws_assume_role_arn: arn:aws:iam::123456789012:role/example-role
  aws_assume_role_name: example-role
  aws_region: us-east-1
  aws_service: lambda
  override_target_host: example.com
  override_target_port: 443
  override_target_protocol: https
" | kubectl apply -f -

Next, apply the KongPlugin resource to an ingress by annotating the KongConsumer object as follows:

kubectl annotate KongConsumer CONSUMER_NAME konghq.com/plugins=aws-request-signing-example

Replace CONSUMER_NAME with the name of the consumer that this plugin configuration will target. You can see your available consumers by running kubectl get KongConsumer.

To learn more about KongConsumer objects, see Provisioning Consumers and Credentials .

Note: The KongPlugin resource only needs to be defined once and can be applied to any service, consumer, or route in the namespace. If you want the plugin to be available cluster-wide, create the resource as a KongClusterPlugin instead of KongPlugin.

Add this section to your declarative configuration file:

plugins:
- name: aws-request-signing
  consumer: CONSUMER_NAME|CONSUMER_ID
  config:
    aws_assume_role_arn: arn:aws:iam::123456789012:role/example-role
    aws_assume_role_name: example-role
    aws_region: us-east-1
    aws_service: lambda
    override_target_host: example.com
    override_target_port: 443
    override_target_protocol: https

Replace CONSUMER_NAME|CONSUMER_ID with the id or name of the consumer that this plugin configuration will target.

A plugin which is not associated to any service, route, or consumer is considered global, and will be run on every request. Read the Plugin Reference and the Plugin Precedence sections for more information.

The following examples provide some typical configurations for enabling the AWS Request Signing plugin globally.

Make the following request:

curl -X POST http://localhost:8001/plugins/ \
    --data "name=aws-request-signing"  \
    --data "config.aws_assume_role_arn=arn:aws:iam::123456789012:role/example-role"  \
    --data "config.aws_assume_role_name=example-role"  \
    --data "config.aws_region=us-east-1"  \
    --data "config.aws_service=lambda"  \
    --data "config.override_target_host=example.com"  \
    --data "config.override_target_port=443"  \
    --data "config.override_target_protocol=https"

Create a KongClusterPlugin resource and label it as global:

apiVersion: configuration.konghq.com/v1
kind: KongClusterPlugin
metadata:
  name: <global-aws-request-signing>
  annotations:
    kubernetes.io/ingress.class: kong
  labels:
    global: "true"
config:
  aws_assume_role_arn: arn:aws:iam::123456789012:role/example-role
  aws_assume_role_name: example-role
  aws_region: us-east-1
  aws_service: lambda
  override_target_host: example.com
  override_target_port: 443
  override_target_protocol: https
plugin: aws-request-signing

Add a plugins entry in the declarative configuration file:

plugins:
- name: aws-request-signing
  config:
    aws_assume_role_arn: arn:aws:iam::123456789012:role/example-role
    aws_assume_role_name: example-role
    aws_region: us-east-1
    aws_service: lambda
    override_target_host: example.com
    override_target_port: 443
    override_target_protocol: https