Skip to content
|
search
Plugin Hub
report-issueReport an issue
header icon

Kong Service Virtualization Configuration Examples

By Optum

Configuration Examples

The following examples provide some typical configurations for enabling the kong-service-virtualization plugin on a service.

Make the following request:

curl -X POST http://localhost:8001/services/SERVICE_NAME|SERVICE_ID/plugins \
    --data "name=kong-service-virtualization"  \
    --data "config.virtual_tests.name=TestCase1"  \
    --data "config.virtual_tests.requestHttpMethod=POST"  \
    --data "config.virtual_tests.requestHash=0296217561490155228da9c17fc555cf9db82d159732f3206638c25f04a285c4"  \
    --data "config.virtual_tests.responseHttpStatus=200"  \
    --data "config.virtual_tests.responseContentType=application/json"  \
    --data "config.virtual_tests.response=eyJtZXNzYWdlIjogIkFub3RoZXIgU3VjY2VzcyEifQ=="

Replace SERVICE_NAME|SERVICE_ID with the id or name of the service that this plugin configuration will target.

First, create a KongPlugin resource:

echo "
apiVersion: configuration.konghq.com/v1
kind: KongPlugin
metadata:
  name: kong-service-virtualization-example
plugin: kong-service-virtualization
config:
  virtual_tests:
    name: TestCase1
    requestHttpMethod: POST
    requestHash: '0296217561490155228da9c17fc555cf9db82d159732f3206638c25f04a285c4'
    responseHttpStatus: 200
    responseContentType: application/json
    response: eyJtZXNzYWdlIjogIkFub3RoZXIgU3VjY2VzcyEifQ==
" | kubectl apply -f -

Next, apply the KongPlugin resource to an ingress by annotating the service as follows:

kubectl annotate service SERVICE_NAME konghq.com/plugins=kong-service-virtualization-example

Replace SERVICE_NAME with the name of the service that this plugin configuration will target. You can see your available ingresses by running kubectl get service.

Note: The KongPlugin resource only needs to be defined once and can be applied to any service, consumer, or route in the namespace. If you want the plugin to be available cluster-wide, create the resource as a KongClusterPlugin instead of KongPlugin.

Add this section to your declarative configuration file:

plugins:
- name: kong-service-virtualization
  service: SERVICE_NAME|SERVICE_ID
  config:
    virtual_tests:
      name: TestCase1
      requestHttpMethod: POST
      requestHash: '0296217561490155228da9c17fc555cf9db82d159732f3206638c25f04a285c4'
      responseHttpStatus: 200
      responseContentType: application/json
      response: eyJtZXNzYWdlIjogIkFub3RoZXIgU3VjY2VzcyEifQ==

Replace SERVICE_NAME|SERVICE_ID with the id or name of the service that this plugin configuration will target.

The following examples provide some typical configurations for enabling the kong-service-virtualization plugin on a route.

Make the following request:

curl -X POST http://localhost:8001/routes/ROUTE_NAME|ROUTE_ID/plugins \
    --data "name=kong-service-virtualization"  \
    --data "config.virtual_tests.name=TestCase1"  \
    --data "config.virtual_tests.requestHttpMethod=POST"  \
    --data "config.virtual_tests.requestHash=0296217561490155228da9c17fc555cf9db82d159732f3206638c25f04a285c4"  \
    --data "config.virtual_tests.responseHttpStatus=200"  \
    --data "config.virtual_tests.responseContentType=application/json"  \
    --data "config.virtual_tests.response=eyJtZXNzYWdlIjogIkFub3RoZXIgU3VjY2VzcyEifQ=="

Replace ROUTE_NAME|ROUTE_ID with the id or name of the route that this plugin configuration will target.

First, create a KongPlugin resource:

echo "
apiVersion: configuration.konghq.com/v1
kind: KongPlugin
metadata:
  name: kong-service-virtualization-example
plugin: kong-service-virtualization
config:
  virtual_tests:
    name: TestCase1
    requestHttpMethod: POST
    requestHash: '0296217561490155228da9c17fc555cf9db82d159732f3206638c25f04a285c4'
    responseHttpStatus: 200
    responseContentType: application/json
    response: eyJtZXNzYWdlIjogIkFub3RoZXIgU3VjY2VzcyEifQ==
" | kubectl apply -f -

Next, apply the KongPlugin resource to an ingress by annotating the ingress as follows:

kubectl annotate ingress INGRESS_NAME konghq.com/plugins=kong-service-virtualization-example

Replace INGRESS_NAME with the name of the ingress that this plugin configuration will target. You can see your available ingresses by running kubectl get ingress.

Note: The KongPlugin resource only needs to be defined once and can be applied to any service, consumer, or route in the namespace. If you want the plugin to be available cluster-wide, create the resource as a KongClusterPlugin instead of KongPlugin.

Add this section to your declarative configuration file:

plugins:
- name: kong-service-virtualization
  route: ROUTE_NAME|ROUTE_ID
  config:
    virtual_tests:
      name: TestCase1
      requestHttpMethod: POST
      requestHash: '0296217561490155228da9c17fc555cf9db82d159732f3206638c25f04a285c4'
      responseHttpStatus: 200
      responseContentType: application/json
      response: eyJtZXNzYWdlIjogIkFub3RoZXIgU3VjY2VzcyEifQ==

Replace ROUTE_NAME|ROUTE_ID with the id or name of the route that this plugin configuration will target.

A plugin which is not associated to any service, route, or consumer is considered global, and will be run on every request. Read the Plugin Reference and the Plugin Precedence sections for more information.

The following examples provide some typical configurations for enabling the Kong Service Virtualization plugin globally.

Make the following request:

curl -X POST http://localhost:8001/plugins/ \
    --data "name=kong-service-virtualization"  \
    --data "config.virtual_tests.name=TestCase1"  \
    --data "config.virtual_tests.requestHttpMethod=POST"  \
    --data "config.virtual_tests.requestHash=0296217561490155228da9c17fc555cf9db82d159732f3206638c25f04a285c4"  \
    --data "config.virtual_tests.responseHttpStatus=200"  \
    --data "config.virtual_tests.responseContentType=application/json"  \
    --data "config.virtual_tests.response=eyJtZXNzYWdlIjogIkFub3RoZXIgU3VjY2VzcyEifQ=="

Create a KongClusterPlugin resource and label it as global:

apiVersion: configuration.konghq.com/v1
kind: KongClusterPlugin
metadata:
  name: <global-kong-service-virtualization>
  annotations:
    kubernetes.io/ingress.class: kong
  labels:
    global: "true"
config:
  virtual_tests:
    name: TestCase1
    requestHttpMethod: POST
    requestHash: '0296217561490155228da9c17fc555cf9db82d159732f3206638c25f04a285c4'
    responseHttpStatus: 200
    responseContentType: application/json
    response: eyJtZXNzYWdlIjogIkFub3RoZXIgU3VjY2VzcyEifQ==
plugin: kong-service-virtualization

Add a plugins entry in the declarative configuration file:

plugins:
- name: kong-service-virtualization
  config:
    virtual_tests:
      name: TestCase1
      requestHttpMethod: POST
      requestHash: '0296217561490155228da9c17fc555cf9db82d159732f3206638c25f04a285c4'
      responseHttpStatus: 200
      responseContentType: application/json
      response: eyJtZXNzYWdlIjogIkFub3RoZXIgU3VjY2VzcyEifQ==